rich1978 Posted July 31, 2009 Share Posted July 31, 2009 I've just moved into a new house but dont have any codes for my veritas 8 alarm, does anyone know a reset code i could use? Regards Rich Link to comment Share on other sites More sharing options...
Avalon Posted July 31, 2009 Share Posted July 31, 2009 Found this online... Remove the lid of the control panel,be prepaired for the sounders to start,dont panic turn off the mains supply to the control panel then remove one of the battery leads.There is a spring in the middle at the top of the circuit board turn on the mains supply and press this spring in and release again ( three times ).Reconnect the battery lead,refit the lid of the panel.The code number is now 4321 enter this number then press reset.You should now be able to use this system now. Link to comment Share on other sites More sharing options...
sheffgrow Posted July 31, 2009 Share Posted July 31, 2009 if you pm me ill let u know how to do this without setting the alarm off, ps: your not a burglar are you? Link to comment Share on other sites More sharing options...
rich1978 Posted August 1, 2009 Author Share Posted August 1, 2009 Thanks Avalon, i'll give it a whirl... Link to comment Share on other sites More sharing options...
grumpy Posted August 1, 2009 Share Posted August 1, 2009 Engineer codes for this panel are 1234 & 4321 Link to comment Share on other sites More sharing options...
saxondale Posted August 1, 2009 Share Posted August 1, 2009 (edited) if you pm me ill let u know how to do this without setting the alarm off, ps: your not a burglar are you? unfortunalty thats just not possible. As for the rest of the posts .... feel free, reboot it .....I guarantee it wont work afterwards but at least you`ll think it is. see the default settings are NOT suitable for using "straight out of the box" on this particular panel, at best you`ll need a full manuall and a half decent understanding of how the system was originally set up, at worst the original installer "locked" the codes and you`ll be left with setting you cant use and no way to alter them - priceless. Edited August 1, 2009 by saxondale Link to comment Share on other sites More sharing options...
PrincessKate Posted August 1, 2009 Share Posted August 1, 2009 Engineer codes for this panel are 1234 & 4321 when installing, engineer codes should always be changed... as knowing the engineer code as you say one of them how easy would it be for some one to break in? making the alarm pointless Link to comment Share on other sites More sharing options...
saxondale Posted August 1, 2009 Share Posted August 1, 2009 when installing, engineer codes should always be changed... as knowing the engineer code as you say one of them how easy would it be for some one to break in? making the alarm pointless makes no difference but lets not let the "i know how to disable your alarm" crowd into our little secret Link to comment Share on other sites More sharing options...
sheffgrow Posted August 1, 2009 Share Posted August 1, 2009 (edited) re:saxondales post ill bet you £1000 you can mr know it all seeing as how i have the installation manual infront of me and i did one with the exact same problem last week:hihi: Edited August 1, 2009 by sheffgrow Link to comment Share on other sites More sharing options...
rich1978 Posted August 2, 2009 Author Share Posted August 2, 2009 If you let me know how to do it......we could both prove him wrong:) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now