soul sista   10 #1 Posted January 24, 2015 washer wont rinse and drain anyone know whats wrong with it ? Share this post Link to post Share on other sites Share this content via...
no.1 Â Â 10 #2 Posted January 24, 2015 filter may be blocked but thats just stabbing in the dark as you havent even mentioned a make and model number! Share this post Link to post Share on other sites Share this content via...
hackey lad   3,991 #3 Posted January 24, 2015 could be a blocked pump . on the front of washer at bottom there is usually a flap which pulls forward , behind this is a screwed plug . if you do open the screw try to catch water in a bowl/ tray . keep a mop handy Share this post Link to post Share on other sites Share this content via...
FORE Â Â 12 #4 Posted January 24, 2015 First things drain off the water or the bloody lot will come out when you remove the filter screw!!!!!! Â Get a bucket or two. Remove the pipe from the drain and lower it into the bucket and allow the water to drain out. Raise when bucket full to swap bucket. Â When you have drained off what you can, THEN prepare mops / towels to remove filter cover. THERE WILL STILL BE SOME UNDRAINED WATER - so be ready! Â Remove fluff etc from filter. Â LOOK into filter housing and see if you can rotate the pump impellor ( fins or whatever they are called). Sometimes there can be a coin / string prevention rotation and therefore pumping. Â Good luck! Share this post Link to post Share on other sites Share this content via...
hackey lad   3,991 #5 Posted January 24, 2015 good advice. I forgot to put the part about draining first Share this post Link to post Share on other sites Share this content via...