blackdarkcha Posted May 19, 2007 Share Posted May 19, 2007 hi has anyone got any advice on what i need to do to use a mikomi 54 in 1 card reader.All i get is format and when i click on that it formats and tells me to take out the card but after that i get nothing.Can anyone tell me what i need to do the card is a camera memory card that i want reading thanks:D Link to comment Share on other sites More sharing options...
Ghozer Posted May 19, 2007 Share Posted May 19, 2007 You should just put in the memory card, and go to my computer, click on the 'drive' that its in, if it doesnt recognize it, it could be that the camera uses its own format for the card, in which case you'll have to use the camera, or find out if you can change the format it uses.... Link to comment Share on other sites More sharing options...
mrmist Posted May 19, 2007 Share Posted May 19, 2007 Yeah normally you would just put your memory card into the reader and then plug the reader into your computer. Presuming you run a Windows OS newer than Windows 98 it should just show up as a new drive or set of drives in "my computer". Link to comment Share on other sites More sharing options...
melthebell Posted May 19, 2007 Share Posted May 19, 2007 Yeah normally you would just put your memory card into the reader and then plug the reader into your computer. Presuming you run a Windows OS newer than Windows 98 it should just show up as a new drive or set of drives in "my computer". itll add as a removable drive in my computer well mine is a 4 in 1 and pops up as 4 different removable drives Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.