AmyW Â Â 10 #1 Posted October 23, 2006 Hi, We are looking for a builder to knock a doorway through between our dining room and kitchen (supporting wall) and to raise the height of the lintel in the fireplace in the kitchen (to install a cooker into the gap). Will want someone who will get it signed off with building regs etc. Any recommendations? Amy x Share this post Link to post Share on other sites Share this content via...
webbud2 Â Â 10 #2 Posted October 24, 2006 might be able to help you here ,who ever you use you should make sure they install tempary props two ether side of the wall with skaffolding boards placed up against the cieling ,this will support the weight of the first floor rooms above ,then two more props that are designed to go into the wall should go in just above were the steel R S J is to be inserted then the gap needed to insert the R S G can be knocked out when it is in and the gap filled with cement, slate, bricks depending on the gap the wall gan be taken out leaving at least ten inches either side for the R S J to rest on Share this post Link to post Share on other sites Share this content via...