steve100 Posted September 25, 2006 Share Posted September 25, 2006 I currently have a 256mb memory card PC2100(CL2.5) DDR RAM. I have been given some memorys cards by a friend some are 128 and one is 256. One is a PC333 DDR 16/C.256mb Can this be fitted to run along side the one above. Can I do any damage by try them or will it just say not compatible. some of the others are pc100 128mb pc-133 128mb sdram many thanks steve Link to comment Share on other sites More sharing options...
Ghozer Posted September 25, 2006 Share Posted September 25, 2006 PC100/PC133 wont work with thoes, PC2100 Is (I believe) 333Mhz any ways, so your other PC333 (As you call it) will work fine along side the PC2100 you have.. CL2 and CL2.5 wont really make a difference, your PC will use the slower (2.5) setting for both.. Link to comment Share on other sites More sharing options...
alkatraz Posted September 26, 2006 Share Posted September 26, 2006 Aren't 2100 and 133 different slots? Hence not physically pairable.. been a while since i looked at any.. but I think that's right. Link to comment Share on other sites More sharing options...
Ghozer Posted September 26, 2006 Share Posted September 26, 2006 thats correct Link to comment Share on other sites More sharing options...
steve100 Posted September 26, 2006 Author Share Posted September 26, 2006 thats correct Thanks guys thought the 2100 and 333 would be ok as they have the right slots but dosent see the xtra. think the 2100 is 266hz and the 333 is what it says. bit stuck really now Link to comment Share on other sites More sharing options...
Ghozer Posted September 26, 2006 Share Posted September 26, 2006 the 2100 and the "333" will work together, just the 333 will get slowed down to the slowest speed (being 266) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.