Runningman   148 #1 Posted June 29, 2020 I recently bought a pack of screws, but didn't notice they were designed for use on MDF Although I have a large range of Ferrules, none of them fit the head of the screws purchased On the pack the Ferrule head is marked as TX Where could I obtain the Ferrule required without having to buy a whole set of different sizes ? Share this post Link to post Share on other sites Share this content via...
forgeman   18 #2 Posted June 29, 2020 Tx denotes the head is Torx which is a trade mark and made under license. These come in a variety of sizes from Tx5 the smallest to Tx60 the largest. If your screws are all the same head size I suggest you take one with you to buy the correct size. These can be purchased from Wickes but would less expensive at Toolstation. Hope this helps. Share this post Link to post Share on other sites Share this content via...
RJRB   688 #3 Posted June 29, 2020 Set of 6 sizes ..£2.99 at Screwfix Share this post Link to post Share on other sites Share this content via...
Runningman   148 #4 Posted June 29, 2020 Hi forgeman and RJRB and thanks ! Share this post Link to post Share on other sites Share this content via...
RJRB   688 #5 Posted June 29, 2020 Just a thought.....if you identify the size that you need for a one off job you will be better buying the 3 pack of one size for £2.59 Share this post Link to post Share on other sites Share this content via...
choogling   14 #6 Posted June 29, 2020 If you look closely at the screw heads you may see a pin in the middle where the bit fits they are a tamperproof version .  Share this post Link to post Share on other sites Share this content via...