cerdo1 Â Â 10 #1 Posted November 14, 2016 I have a Rotax 373, approx 1970, 2 stroke twin. It has a Bosch CD ignition with lighting coil, this being the problem ! no spark, can anyone help, advise, fix! It is a strange ignition system. please help:) Share this post Link to post Share on other sites Share this content via...
Obelix   11 #2 Posted November 15, 2016 First hit on google for Rotax 373 brings up the handbook - have you looked in there? Share this post Link to post Share on other sites Share this content via...
cerdo1 Â Â 10 #3 Posted November 15, 2016 I have, its all there but i cant get my head around it, getting volts to the ht leads no spark, tested the coils got a spark, bit snookered. Share this post Link to post Share on other sites Share this content via...
Obelix   11 #4 Posted November 15, 2016 If it's a CD then you need to check that the capacitor is still good and that the trigger is working. It's probably a thyristor trigger. They are not quite the same as a "normal" coil ignition as they run a lot faster. Share this post Link to post Share on other sites Share this content via...
geared   302 #5 Posted November 15, 2016 You have voltage out the end of the HT leads? Do they arc when you put the lead against the block? Share this post Link to post Share on other sites Share this content via...
cerdo1 Â Â 10 #6 Posted November 15, 2016 Ive got the condenser out , its no good, stuggling getting a replacement, i have serial numbers etc. Cant find one anywhere Share this post Link to post Share on other sites Share this content via...
geared   302 #7 Posted November 15, 2016 Have you tried Gunson in Hillsborough, they can get lots of hard to find parts.  0114 233 1561 Share this post Link to post Share on other sites Share this content via...