glitz   10 #1 Posted February 22, 2016 I originally had an aerial from my sky dish to the tv in my bedroom which worked for about a month. I now cant get a signal on my tv to even get digital and was told that I needed a magic eye. As the aerial is connected to my sky dish would I connect the magic eye to that aerial and tv or does it have to go in the sky box. Any help appreciated. Share this post Link to post Share on other sites Share this content via...
Ghozer   112 #2 Posted February 22, 2016 http://www.aerialsat.com/customer/help-and-support/sky-tv-link-magic-eye/how-to-install-a-sky-tv-link-magic-eye.html Share this post Link to post Share on other sites Share this content via...
jimmy marsh   10 #3 Posted February 22, 2016 the magic eye has to come from the second rf on the back of sky box.  the cable from your sky dish will be for a box only not tv link(magic eye )  thanks jimmy Share this post Link to post Share on other sites Share this content via...
glitz   10 #4 Posted February 22, 2016 I have an aerial into my upstairs tv, not a box. I did get sky for a while. I have a cable in my 2nd rf for that tv Share this post Link to post Share on other sites Share this content via...
jimmy marsh   10 #5 Posted February 22, 2016 check to see if the red light is on the magic eye if not go to intallation setting on sky box to check if rf out put is switched on. some times it resets its self but you should still get a picture even with 2nd rf switched off. if the 2nd rf is still on then id check cable to see if theres any damage or check 2nd tv is tuned to correct rf. Share this post Link to post Share on other sites Share this content via...
glitz   10 #6 Posted February 22, 2016 tried magic eye in 2nd rf and there was no light, wondering now if magic eye is faulty Share this post Link to post Share on other sites Share this content via...
jimmy marsh   10 #7 Posted February 22, 2016 either that is faulty or 2nd rf out put is switched off  ---------- Post added 22-02-2016 at 17:49 ----------  use muilti meter on 2nd rf out put and see if there is 9 volts coming out of it Share this post Link to post Share on other sites Share this content via...