karl101 Â Â 10 #1 Posted February 28, 2015 Been messing with drops of water. Â This is what you get when two drips meet. Â Â K Share this post Link to post Share on other sites Share this content via...
rachks   10 #2 Posted March 1, 2015 nice Karl! Haven't done water drops for ages and never tried 2 at the same time. Might have to get the kit back out for this one  What set up are you using for the drops?  Cheers Steve Share this post Link to post Share on other sites Share this content via...
karl101 Â Â 10 #3 Posted March 2, 2015 (edited) I used a solenoid to make the water drops and a phototransistor/laser combo to detect the drops as they go past. These are connected to an Arduino and some home-built electronics to control the camera and flash. Â Â K. Â An Arduino: http://arduino.cc/en/Guide/Introduction Edited March 2, 2015 by karl101 Share this post Link to post Share on other sites Share this content via...
rachks   10 #4 Posted March 3, 2015 nice  Slightly more advanced than my freezer bag with a small hole in it tied to a cupboard door with a camera remote shutter release and me trying to time it set up then Share this post Link to post Share on other sites Share this content via...