Micky ET Â Â 10 #865 Posted November 8, 2014 if you have replaced all the vessel and prv and checked the pipe leading to the expansion vessel is not blocked then you have one of two problems 1, there is a leak on your heating system. 2. you main heat exchanger has pin holed and is leaking down the condensate trap. Â MIKE Â Met Gas Plumbers Sheffield. Share this post Link to post Share on other sites Share this content via...
neeeeeeeeeek   10 #866 Posted November 8, 2014 Cheers all. Hoping it is not the heat exchanger.  Shall try the red leaver to fluch the pressure relief valve, fingers crossed . Share this post Link to post Share on other sites Share this content via...
Happ Hazzard   10 #867 Posted November 9, 2014 (edited) You can get a new A-rated boiler plus 10 years full cover including parts and labour for only £17 a month. Why people struggle on with old inefficient boilers that leave them with high gas bills every month plus massive expense every time they break down is beyond me. Edited November 9, 2014 by Happ Hazzard Share this post Link to post Share on other sites Share this content via...
stejen   12 #868 Posted November 10, 2014 Might be daft question but .... I have Worcester junior boiler in my static van and was wondering does it cause any damage/problems if the gas {bottled supply] runs out ? or does it simply turn off until supply is re-established . Share this post Link to post Share on other sites Share this content via...
Micky ET Â Â 10 #869 Posted November 10, 2014 IF there is dirt in the bottom. of the tank it could block the filter but other than that you should just re purge the gas before lighting. Share this post Link to post Share on other sites Share this content via...
BenWood   10 #870 Posted November 13, 2014 (edited) Hi all,  The timer on my boiler is playing up (not keeping time) Here's a few photos of the innards.  Does that loose wire need to be connected? If so, where to? I can't see anywhere.  Any help appreciated, cheers.  http://i.imgur.com/6pvjkrL.jpg http://i.imgur.com/lKrVN7e.jpg http://i.imgur.com/Cq70BLF.jpg  EDIT -  It's a Heatline Monza 28 boiler with a mechanical timer. (push the white bits out to set times on/off) The boiler works fine set permanently on or permanently off but when set to the middle setting (clock) the time is always out after a short time. Edited November 13, 2014 by BenWood more details Share this post Link to post Share on other sites Share this content via...
Micky ET   10 #871 Posted November 18, 2014 Hi all, The timer on my boiler is playing up (not keeping time) Here's a few photos of the innards.  Does that loose wire need to be connected? If so, where to? I can't see anywhere.  Any help appreciated, cheers.  http://i.imgur.com/6pvjkrL.jpg http://i.imgur.com/lKrVN7e.jpg http://i.imgur.com/Cq70BLF.jpg  EDIT -   Looks Like the standard Grasslin one would do it we carry those on the van got appointments for thursday if you want.  Thanks  Mike  It's a Heatline Monza 28 boiler with a mechanical timer. (push the white bits out to set times on/off) The boiler works fine set permanently on or permanently off but when set to the middle setting (clock) the time is always out after a short time.  Looks Like the standard Grasslin one would do it we carry those on the van got appointments for thursday if you want. Or the other option would be to have Wireless programable room thermostat fitted to your boiler this would give you better control. Share this post Link to post Share on other sites Share this content via...
MelAgain   10 #872 Posted November 19, 2014 We've recently moved into a house that has a very old boiler with no thermostat. It's all been checked and is in really good condition. But I wondered if we would be able to have a thermostat (Maybe wireless??) fitted to it because it is either Off or Volcanic. Share this post Link to post Share on other sites Share this content via...
JBradleybz   10 #873 Posted November 19, 2014 We've recently moved into a house that has a very old boiler with no thermostat. It's all been checked and is in really good condition. But I wondered if we would be able to have a thermostat (Maybe wireless??) fitted to it because it is either Off or Volcanic.  Hi happy to call and check the system and quote free for you cheers Jon at JB Heating. Share this post Link to post Share on other sites Share this content via...
Micky ET   10 #874 Posted November 19, 2014 Hi We could fit this for you please call us with a quote,  Thanks  Mike  Met Gas Plumbers Sheffield Share this post Link to post Share on other sites Share this content via...
corgigasman   10 #875 Posted November 19, 2014 We've recently moved into a house that has a very old boiler with no thermostat. It's all been checked and is in really good condition. But I wondered if we would be able to have a thermostat (Maybe wireless??) fitted to it because it is either Off or Volcanic.  Happy to view and quote, cheers, Steve Share this post Link to post Share on other sites Share this content via...
cv65user   10 #876 Posted November 24, 2014 (edited) Hi  I got an idea l boiler goes to a honeywell st9400c. With pressurised tank . I got hot water fine. When I press extra hour for hot water boiler fires up and fine.  I notice rads came on fine today at 5 pm but just now no heat at 8pm from rads. BOILER remains on zero.  ive tried reset and when I press over ride I can hear the valve spin down.  there's no resistance on one of the valves when I slide the spring. Im not sure if one for hot water and ones for the central heating Edited November 24, 2014 by cv65user Share this post Link to post Share on other sites Share this content via...