damo_bar   10 #1 Posted June 6, 2015 Got a Peugeot expert van and clutch is stopping in floor not springing back up cable was broke near the pedal so changed cable think it's fitted right but the clutch is still going to floor and not coming back up on its own is the cable fitted wrong or another problem bear in mind new clutch has been fitted 18 months ago Share this post Link to post Share on other sites Share this content via...
Timeh   10 #2 Posted June 6, 2015 Clutch fluid pipe sprung a leak? Share this post Link to post Share on other sites Share this content via...
kevvy   12 #3 Posted June 6, 2015 If it's a Cable Clutch it won't have fluid. Share this post Link to post Share on other sites Share this content via...
Timeh   10 #4 Posted June 6, 2015 Do'h! Didnt see he had his cable replaced. lol Share this post Link to post Share on other sites Share this content via...
carosio   186 #5 Posted June 6, 2015 Doesn't the pedal itself have a return-spring? Share this post Link to post Share on other sites Share this content via...
cassity   10 #6 Posted June 6, 2015 Doesn't the pedal itself have a return-spring?  It may have but it could be on the lever at the gearbox, which may have dislodged when the cable snapped. Maybe. Share this post Link to post Share on other sites Share this content via...
cuttingedge   10 #7 Posted June 7, 2015 There should be a spring on the clutch pedal, which should return pedal with or without cable connected,the spring on the cable is only for adjusting the slack on the cable and clutch clearance. Share this post Link to post Share on other sites Share this content via...
damo_bar   10 #8 Posted June 7, 2015 There is a springing on the pedal but it's still staying on floor Share this post Link to post Share on other sites Share this content via...
Lobos   10 #9 Posted June 7, 2015 Go to the clutch lever on the gearbox you should be able to see by the movement of the lever if it is engaged on the thrust bearing if it has become detached from the clutch thrust bearing it will be loose. sometimes the clutch bearing lever becomes detached from the bearing when the clutch cable brakes,also the gearbox clutch lever return spring can come off inside the gearbox you might have to remove the gearbox to be sure..there's quite a few things that can cause that problem. Share this post Link to post Share on other sites Share this content via...