BMXBOY3001   10 #1 Posted December 8, 2012 STOLEN!!!!!!!! Custom Identiti Jump Bike. LARGE REWARD FOR THE RETURN, OR INFORMATION LEADING TO THE RETURN, NO QUESTIONS ASKED...  DETAILS: Stolen from; Sheffield Hallam university bike storage - Owen building main entrance opposite Arudelgate road. Time/Date; 19:25 (On CCTV) 7/12/2012. For the locals; The Thieves Stole the bike and headed through the SHU science park and behind the SHU Hubs building. SPEC: Frame: Identiti P66X, Polished steel colour, Classic style black Identiti stickers on the front bottom tubes. Front Suspension: Marzocchi Dirt Jumper III, 20mm Dropouts, 100mm of Travel Brakes Front: Avid Juicy 3 Hydraulic Disc with 7" Rotor Brakes Rear: Avid Juicy 3 Hydraulic Disc with 6? Rotor Brake Levers: Avid Hydraulic Disc Pedals: BMX Platform Crankset: Primo Chain: KMC Hub Rear: Single Speed Alloy Double Sealed, 36 Hole Disc Hub Front: Pro Alloy Quad Sealed, 32 Hole Disc with 20mm Through Axle Rims: WTB Dual Duty Freeride, Double Wall, 32 Hole Spokes Nipples: WTB 14 Gauge Black Stainless Tires: Maxxis Holy Roller , 26" x 2.4" Saddle: Odyssey lumber jack.. (Red and black chequered) Seatpost: Iddentiti... Finger print logo on side of it.. Seatclamp; odyssey, in white. Stem: Gravity DH Handlebar: FSA Maximus Riser, Double Butted, 40mm Rise Grips: Marin Double Locking with Drop Guard End Cap  In short all parts were black, except the polished steel frame, red and black seat, and white seat clamp.  The picture above is the best picture I could find of the same frame. The stickers are not the same though...  LARGE REWARD FOR THE RETURN, OR INFORMATION LEADING TO THE RETURN, NO QUESTIONS ASKED  Please contact me on 07725964769, anything info might help. Share this post Link to post Share on other sites Share this content via...