Jump to content

Vauxhall Vectra club cdti

Recommended Posts

......................................................

Edited by terri37

Share this post


Link to post
Share on other sites

The dual mass flywheel which you may have wears out as does the clutch.

It's a gearbox out job to do it so while the box is out do the flywheel as well.

If you don't and it locks up or destroys itself it may wreck the clutch AND the gearbox.

I wouldn't expect much change from £4-500 to change both using decent parts.

Share this post


Link to post
Share on other sites
The dual mass flywheel which you may have wears out as does the clutch.

It's a gearbox out job to do it so while the box is out do the flywheel as well.

If you don't and it locks up or destroys itself it may wreck the clutch AND the gearbox.

I wouldn't expect much change from £4-500 to change both using decent parts.

 

Thank you,do you recommend anyone or garage fo that price

Share this post


Link to post
Share on other sites

Shop around!!

Mr clutch at hillsborough would be a starting point.

Rutland auto's on rutland rd are good but usually busy.

Share this post


Link to post
Share on other sites

If you do have a dual mass flywheel then don't skimp like I did. The flywheel was ok so I thought I would save money and just have the clutch done. Big mistake! 2 years later it had not failed but the mettalic dust from wear caused sensors to fail and the starter motor.

 

Never again. That £275 I saved cost me over a thousand in the end.

Share this post


Link to post
Share on other sites
If you do have a dual mass flywheel then don't skimp like I did. The flywheel was ok so I thought I would save money and just have the clutch done. Big mistake! 2 years later it had not failed but the mettalic dust from wear caused sensors to fail and the starter motor.

 

Never again. That £275 I saved cost me over a thousand in the end.

 

Thanks Gerry booth for that ??

 

---------- Post added 30-08-2015 at 12:30 ----------

 

Shop around!!

Mr clutch at hillsborough would be a starting point.

Rutland auto's on rutland rd are good but usually busy.

 

Thank you carltoncdx ????

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.