Hi I am hoping someone can help,
recently change my rear wheel on motorcycle disc bolts all rounded off so had to drill the heads off so I could fit the disc to new wheel.
Have tried stud extractors, I now have 2 bolts with snapped extractors stuck in them as well and 1 with a broken drill bit in. Only managed to remove 1 of the 6 bolts.
Hoping someone can help or point me in direction of some where that can remove these with out damaging the wheel or threads.
thanks

Hi I am hoping someone can help,
recently change my rear wheel on motorcycle disc bolts all rounded off so had to drill the heads off so I could fit the disc to new wheel.
Have tried stud extractors, I now have 2 bolts with snapped extractors stuck in them as well and 1 with a broken drill bit in. Only managed to remove 1 of the 6 bolts.
Hoping someone can help or point me in direction of some where that can remove these with out damaging the wheel or threads.
thankshi i can collect and remove these bolts for you ''give me a ring mick

i would take the wheel to R.E.S engineers,they should sort it,very good with that kind ov thing :)

Drilling and using stud extractors isn't just about drilling a hole: you need to drill, accurately, the biggest hole you can, without drilling into the threads the stud is stuck into. hth

I always take my bikes to R.T.T MOTO at Hoyland Common ( 3 miles north of Chapeltown ) Tel :01226 743287 ...ask for Pete (top bloke..knows his stuff !! )

first mistake was drilling the heads of see if HATHER-SAGE can do it then let me know if not.