View Full Version : Toshiba satalite a10


spritulist
09-01-2008, 21:13
hi does any one know how to remove the cmoss password on a toshiba satalite a10 laptop..as soon as it starts its asking for a pass word...to the bios can any one help thank you:help::help:

terminator
09-01-2008, 21:43
if its just standed bios password remove battery any power then either use jumpe or remove bios battery for a few minutes

ghettostan
09-01-2008, 21:51
or

try some of these password i found on the net. maybe if you enter the right one you can remove it from there?

these are some default passwords by the way.

AMI
Award
bios
setup
cmos
concat
AMI_SW (case sensitive)
AMI!SW/
AMI?SW/
j262

NOTE: With respect to the Award BIOS, the "AWARD_SW" (use without quotes) and (is is case sensitive) password should even override a set password! If not, you may also want try j262 as the password.

spritulist
10-01-2008, 09:51
iv taken the laptop down to the motherboard thiers no cmos battery like on normal boards,just a solderd chip that stores power

alchresearch
10-01-2008, 10:21
On older Toshiba's you had to have a dongle that plugged into the parallel port to clear the CMOS:

Type "Toshiba parallel dongle" into Google.

terminator
10-01-2008, 11:10
iv taken the laptop down to the motherboard thiers no cmos battery like on normal boards,just a solderd chip that stores power
no idea if this would work or not i used to use a program called killcmos not sure if its still available or not.

spritulist
12-01-2008, 10:39
hi the parallel divise worked fantastic cost £2.40 to make..laptop now working saved me hundreds to have it fixed ...one quote was near to £250. the other was £47.00 per hour plus £30.00 unlock plus £65 for new toshiba h\d plus £85 for windows..again thank you

spritulist
12-01-2008, 10:42
the plans are free on the net to take all the passwords of any toshiba...takes less than 20 mins to build