I've just bought a 40" LCD tv, which I intend fitting to the wall myself, as I'm trying to save some money, is there anything I need to know & where can i get a wall bracket from in Sheffield at short notice, please.
I would appreciate some advice...... thanks. :huh:

http://www.maplin.co.uk/Module.aspx?ModuleNo=99093&criteria=tv%20bracket&doy=28m10

Bit pricey though, I think Maplins are open on Sunday.

http://www.maplin.co.uk/Module.aspx?ModuleNo=99093&criteria=tv%20bracket&doy=28m10

Bit pricey though, I think Maplins are open on Sunday.

Price isn't that bad.

The main thing to remember is that you don't save any money if it falls down.
Make sure the wall is brick or breeze.
Use very strong long nylon plugs and heavy screws.
I like to over engineer and use 10/60 coach bolts and a nylon sleeve.
May be a bit over the top but it saves swearing in front of the kids when the TV falls down.

What are you doing with the wires ?

You have mains, a TV coax and an A/V lead of some sort.
Best way is to chase out the walls and put sockets behind the bracket.

NOTE - A QUALIFIED ELECTRICIAN MUST DO THE MAINS WORK.

no more nails (http://www.diytools.co.uk/productimage.aspx/7991/7994/8001/227/1005/1009!TB_UNINMNC)
ought to do the trick. It saves you 65 quid.

Thanks guys... Maplins!!!... yes! never thought ov them & I am worrying about the wires leading to the dvd ect, as I've just decorated I don't really want to channel the wall out just yet, but maybe use trunking?
I am a bit of a "DIY" merchant & never thought of the mains plug behind the set, but I'm looking for a temp' solution for now, also its going to be put on the chimney breast above the gas fire, do you think that would be ok?, as I think it's only single brick thickness.
Thanx for yor valued help guys.

Won't the heat effect the TV if you put it above it?

*has visions of melty emmerdale*

NOTE - A QUALIFIED ELECTRICIAN MUST DO THE MAINS WORK.


I would recommend this advice if you are in any way unsure about electrics.

There is, however, no regulatory requirement that such work (taking an extension from a supply in a living room) needs qualifications.

I would recommend this advice if you are in any way unsure about electrics.

There is, however, no regulatory requirement that such work (taking an extension from a supply in a living room) needs qualifications.

What do you mean by 'taking an extension'? A pre made cable plugged into a socket? Or a spur?

Anyone can do electrical wiring. The thing is, if you change something, it has to be inspected by a 'part P' qualified electrician. By law, that is.

Won't the heat effect the TV if you put it above it?

*has visions of melty emmerdale*
I dont think it will really, as I dont have the gas fire on usually & surely the LCD should withstand some heat, I'll soon know if it starts dripping plastic when I've got mi fav Emmerdale on.

I would recommend this advice if you are in any way unsure about electrics.

There is, however, no regulatory requirement that such work (taking an extension from a supply in a living room) needs qualifications.
I'm pretty competant when it comes to the electrics, it's just that I've had mi orders not to spoil the present decor, but eventually I'll have to brace mi self & dig out the wall I suppose.

Thanks a million to one & all for yor advice.

Not a good idea to fix it above a gas fire, - apart from the obvious danger of overheating, you'll get strong convection currents in the air in front of the screen distorting how you see the picture.

Not a good idea to fix it above a gas fire, - apart from the obvious danger of overheating, you'll get strong convection currents in the air in front of the screen distorting how you see the picture.
Oh dear!!! Somethings got to go, gas fire or brand new sh*t hot telly?????
Yes!! the gas fires eventually going, as I have c/heating anyway, I can put all the other bits & pieces underneath in a cabinet, then i'll have more space. Thanks for that advice.
I'll have to brace mi self for big a shindig with mi family..... Lolz.

What do you mean by 'taking an extension'? A pre made cable plugged into a socket? Or a spur?

Anyone can do electrical wiring. The thing is, if you change something, it has to be inspected by a 'part P' qualified electrician. By law, that is.

This is just not true.

There are certain parts of the house where a new spur does not require Part P Certification.
The living room is one such part.


The regulations state quite clearly:

"Table 1: Work that need NOT be notified to building control bodies.
........ Work that is NOT in a kitchen or special location ...... and consists of;
...... Adding socket outlets and fused spurs to an existing ring or radial circuit ..."

http://www.planningportal.gov.uk/uploads/br/BR_PDF_ADP_2006.pdf


.... and many other advisory/guidance documents will clarify this even more.

I know this is an old thread but just in case anyone picks it up. There's no need to bury the cables in the wall anymore if you don't want to go to all the hassle and expense or just can't because your in a rented house or flat and yer landlord ain't keen on you digging his wall out !!. I saw this cable cover system being demonstrated by a company from Hull at Costco about 3 weeks back. Costco don't sell it yet and I think it's only available off the net.
Anyways I bought one because it looked classy and they claimed it just stuck onto the wall without the need for any screws etc. I was a bit scepitcal about that but there was screw holes fitted just in case and they offered a 14 money back guarrantee, but it fitted just great and looks a million bucks...no more digging the wall out for me when I want to change out a cable 'cos the one on my new games consol is different to the one that's already there......anyway check it out at iconceal.tv
At £45 it's a bit on the pricy side but a damn sight cheaper than getting a leccy in and a plasterer and a painter and decorator:hihi:

I know this is an old thread but just in case anyone picks it up. There's no need to bury the cables in the wall anymore if you don't want to go to all the hassle and expense or just can't because your in a rented house or flat and yer landlord ain't keen on you digging his wall out !!. I saw this cable cover system being demonstrated by a company from Hull at Costco about 3 weeks back. Costco don't sell it yet and I think it's only available off the net.
Anyways I bought one because it looked classy and they claimed it just stuck onto the wall without the need for any screws etc. I was a bit scepitcal about that but there was screw holes fitted just in case and they offered a 14 money back guarrantee, but it fitted just great and looks a million bucks...no more digging the wall out for me when I want to change out a cable 'cos the one on my new games consol is different to the one that's already there......anyway check it out at iconceal.tv
At £45 it's a bit on the pricy side but a damn sight cheaper than getting a leccy in and a plasterer and a painter and decorator:hihi:

I somehow dont think that would look 'classy' above a fireplace. And at £45 for a piece of plastic junk, your having a larf!! Take your spam elsewhere.

not sure what you are taking Bonjon but you need to get your head straight. I don't do spam...in fact I hate it with a vengence. I'm just telling it as it is and you obviously don't know what it is you are commenting on cos the iConceal thing is made of aluminium not plastic junk...well I least the one I bought is....and if you think this type of stuff is "junk" then also check out bosscom.com and also vogels.com and you'll find two other companies that are making similar "junk". These guys woudn't make this stuff if there wasn't a demand for it so reel your neck in a bit mate and check your facts before launching in